There are different types of elevator parts. Some elevator parts are common in traction elevators and hydraulic elevators. Even though it has been many years since elevators entered our country, there is still very little knowledge about this industry.
List of elevator parts
Elevator door
Elevator doors are actually parts that keep passengers inside the elevator (they actually prevent them from falling). Two different sets of doors are used in elevators: doors that surround the car, and doors that open onto the elevator shaft. The doors around the elevator are controlled by an electric motor that is connected to the elevator computer. Many elevators have some kind of motion sensor that prevents the elevator door from closing when someone is between the doors.
Elevator inverter
One of the main parts of the elevator is its inverter. The elevator inverter is actually a type of converter for high-speed elevators that are equipped with a regenerative converter. The elevator motor inverter allows these elevators to effectively use the recovered energy. This piece saves energy. Because it returns the recovered energy to the energy source.
Elevator drive
Elevator drive can be likened to a "brain". Or more precisely, we can say that the drive actually plays the role of a part of the brain in the elevator system. The function of the elevator drive is to manage the movements, speed, and torque of the elevator. If the speed of starting and stopping of an elevator is often low, or if it exhibits sudden movements, this problem can be solved by repairing the elevator drive.
Electronic signal
In elevators with a new mechanism, two new sensors have replaced the fixed sensors. Electrosignal is responsible for the identification process. This part sends the signals to the control box by means of cable trawl. As a result of this part, the elevator will stop at the correct floor.
Hinged door lock
It is very important that the length of the movement of the lock, and when open Due to the presence of cabin doors, the elevator does not move. This task is the responsibility of the door hinge lock.
Elevator door magnet
Elevator door magnet is another part of the elevator. The elevator door magnet is a type of door lock that generates a magnetic force using an electric current. In this way, the strength of the doors increases due to the presence of this magnetic current. Therefore, the doors can withstand the pressure and cannot be forced open.
Elevator Dictator
The function of the elevator dictator is to prevent the door from slamming into the cabin, so that the door somehow close smoothly and easily. This part is installed on the door of the elevator and it prevents the occurrence of loud noise or strong closing of the elevator.
Elevator round weed block
This block is used to transfer engine power and movement to the towing wire. This plate is a part of the elevator suspension system and plays a fundamental role in the movement of the elevator.
Elevator governor
Governor, which is located in the elevator machine room or above it. , is a kind of monitoring device. This part is actually a speed control device in traction elevators, which ensures the safety of the elevator when its speed increases.
Elevator shoe
Among other parts of the elevator, we can mention its elevator shoe. The elevator shoe reduces noise and also reduces noise pollution during the movement of the cabin and the balance weight. One of the other important tasks of the shoe is to remove small irregularities in the rail or at the junction of the rails so that there is no movement disturbance. In general, by using the elevator shoe, the quality of the elevator movement will be higher. . In fact, the elevator rail is responsible for guiding the balance weight and the cabin. Its other task is to restrain the elevator car during emergency braking. In this case, the weight of the entire cabin and its loads is transferred to the rail. This part has a great impact on the safety and performance of the elevator.
Elevator encoder
The encoder is a basic part in the elevator control system that makes the elevator stop at each floor. , open the doors and then close them completely. Another task of the elevator encoder is to adjust the movement of the elevator in a smooth and comfortable way so that the passengers feel comfortable.
Rail Bit
The purpose of the rail bit is actually to help keep the other parts of the elevator stable. For example, one of its uses is to keep the elevator rail fixed and strong on the elevator bracket. Also, the rail bit keeps the parts that are hanging and suspended stable and strong. be The elevator rail bracket is responsible for restraining the elevator rail. In addition, this part connects the elevator guide rail to the concrete wall of the well or its steel structures. The place of installation of this part is in the well and shaft of the elevator.
Towing head hook
The task of the towing head hook is to be between the towing wires, the cabin frame, and the weight frame. Establish balance, connection. In this way, the cabin and the balance weight can remain suspended.
Towing wire
The towing wire is connected to the cabin frame on one side and to the balance weight frame on the other side. In this way, it has the duty to keep the cabin and the balance weight in a suspended state. The towing wire is used to lift the load in elevators and cranes, as well as to transmit mechanical power. It is a metal plate that is used as an interface between two rails. The task of connecting two consecutively placed rails is the responsibility of the back strap of the elevator rail.
Three-phase elevator box
One of the important parts of the elevator is the three-phase elevator box. This box is installed in the motor part of the house and its task is to transfer three-phase and single-phase electricity to other elevator equipment. The elevator three-phase box consists of three-phase fuse, analog wire, signal lamp, single-phase fuse, single-phase socket, and three-phase fuse. The elevator control panel is one of the most important components that is responsible for directing the elevator. This part is actually used as the processing center of the elevator and has the task of controlling the speed of the elevator motor, controlling the direction of movement, processing requests from the cabin and floors, controlling and protecting the elevator's electrical equipment, and detecting the position of the cabin in real time.
Balance weight
The balance weight is part of the balance system in lifting mechanisms and devices. which has the role of stabilizer. From the balance weight in elevators, mobile bridges, elevators, cranes and any device that lifts a lot of weight. This device is used to create balance when carrying cargo.
Cable Trawl
Cable Trawl (which is available in two flat and round models) is a cable. which is used to transfer power to the elevator cabin and communicate between the controller and the elevator cabin. These cables are often black and hang from the elevator cabin.
Revision box
Another part of the elevator is the revision box. The revision box is actually an intermediary to communicate between the elevator cabin and the control panel. Among these connections, it is possible to mention the connection between floors, the connection inside the elevator cabin, the connection with all types of elevator motors and the electric circuits of the cabin. Another important use of the revision box is that it can be used to repair the elevator. When the repair work activates the revision box, all communications from the elevator car to the control panel will be cut off. In this case, the elevator is controlled by the revision box.
Easy Gostar Damavand
Asanbar Gostar Damavand is one of the oldest collections in the country in selling elevators and parts such as cabins, elevator motors, all kinds of Iranian and foreign elevator control panels, doors and elevators, electric stairs and automatic doors, and other equipment with the best quality. Beside our dear customers, you can contact us to buy elevators in Karaj and other cities.